Industrial Oil Transfer Pump

Industrial Oil Transfer Pump

  • Energy Saving
  • High Efficiency
  • Environmental Protection

Our Industrial Oil Transfer Pump is a type of  twin screw pump, which uses two screws that mesh with each other and do not touch each other to pump liquid. It can be used for transporting crude oil, oil and gas mixed transportation, LPG filling, polymer, heavy oil, asphalt, fuel oil, grease, lubricating oil, petroleum additives, gasoline, kerosene, diesel oil, various resins, etc.

Stable Pressure And No Pulsation

Stable conveying pressure and constant flow rate. No pulsation or stirring medium, continuous and smooth supply.

Low noise and long life

Low vibration, no direct mechanical wear, low noise and long service life.


Excellent self-priming performance. Even if the conveyed medium has a high viscosity.

Wide Range Viscosity And Property

Convey extremely high-viscosity chemical materials and transport medium in high temperature, corrosion, etc.

Industrial Oil Transfer Pump


The screw pump is by far one of the most ideal conveying pumps for conveying high viscosity, gas-liquid mixed, and liquefied medium.

In a word, Our twin screw pump can efficiently transport a variety of high and low viscosity mediums, especially the medium that do not allow stirring and the media that are easy to vaporize. 

Industrial Oil Transfer Pump

Typical Pump display

  • Flow: 20~1000m3/h
  • Inlet pressure: ≤1.6MPa (max: 2.5MPa)
  • Outlet pressure: ≤4.0MPa (max: 6.0MPa)
  • Air content: ≤98% (max: 100%)
  • Pressure ratio: ≤18 (max:20)
  • Medium temperature: 20~200℃
  • Flow: 20~500 m3/h
  • Inlet pressure: -0.05~0.8 MPa
  • Outlet pressure: 0.1~3.0 MPa
  • Medium temperature: < 480 ℃
  • Medium viscosity: 0.5~10000 mm2/s
  • Speed: 50~1500 r/min
  • Flow: 0.1~100 m3/h
  • Inlet pressure: allowable maximum negative pressure -0.08 MPa
  • Outlet pressure: ≤ 3.0 MPa
  • Suction height: 5~7 m
  • Speed: 700~1500 r/min

Industrial Oil Transfer Pump


We pay much attention to the spirit of the contract, and we can unconditionally solve any quality problems with the pumps sold. 

Pre-sales consulting service
We recommend suitable products according to the actual working conditions and needs of customers. Pumps can also be developed and designed according to needs, and customized services can be provided. During the epidemic, we also provide remote detection technical support.
Strict quality control
From raw materials to the production process before leaving our factory, all performance indicators are strictly tested, and the professional QC team controls each process. Product quality is our foundation.
After-sales service
Products sold, the quality conditions of them are still tracked throughout the using process, and our technicians will guide the installations and uses throughout the process. We promise that we can unconditionally solve any quality problems with the pumps sold. 
Previous slide
Next slide


Ask Us Anything Anytime