1 Efficient slicing operation
2 Simple and convenient operation
3 Safe and reliable operation
4 Easy maintenance and inspection
It is widely used in production enterprises that use rubber as raw material, such as tire factories, modified asphalt factories, waterproof material factories, self-adhesive factories, masking glue factories, and rubber research units. It is used for pre-slicing large pieces of rubber, and then for subsequent crushing or processing, weighing, etc.
1——Rubber Block
2——Guide Chute
3——Hob
4——Roller
5——Outlet Chute
Our rubber slicer (another name:roller type rubber slicer) is a volumetric quantitative rubber chip feeder, The principle is to cut the rubber material through a roller cutter inside the machine.
The schematic diagram of its structure is shown in Figure 1. The rubber block (1) falls into the roller (4) through the material guide groove (2) from top to bottom, under the action of the shearing pair formed by the hob (3) and the roller (4), the rubber block is cut and dropped into the receiving chute (5).
Rubber slices are different from brittle materials such as steel plates and plastics. Due to the “sticky and soft” characteristics of rubber materials, the structure of the rubber slicer has its particularity. Since our product structure is a drum type, its slicing efficiency is extremely high, and it is the slicing form with the highest slicing efficiency at home and abroad.
Compared with similar domestic products, the cutting efficiency is increased by at least 23 times, and the cutting time is very short. The slicer can achieve a production capacity of up to six tons per hour (6t/h) under the condition that the material is basically continuously supplied and conveyed.
Our rubber slicer can quickly and accurately realize the cutting operation after receiving the material, and discharge the material from the bottom of the machine, without manual participation, and the operation is convenient and fast.
Our rubber slicer is a completely closed slicing process. The cutter (roller knife) is located in the box, which will not cause harm to the operator, and the operation is safe and reliable.
The internal structure of the rubber slicer is simple, easy to assemble and disassemble, without special requirements and special tools, and the equipment can be completely repaired according to the operation and maintenance instructions provided by our company.
Our rubber slicer is widely used in production enterprises that use rubber as raw material, such as: tire factory, modified asphalt factory, waterproof material factory, self-adhesive factory, masking glue factory and rubber research unit. It is used for pre-slicing large pieces of rubber, and then for subsequent crushing or processing, weighing, etc.
Our company’s rubber slicer is suitable for cutting block-shaped rubber blocks.
The entrance size of our rubber slicer: length × width × height = 800mm × 650mm × 100mm.
Therefore, there are certain requirements for the external dimensions of the rubber block, that is:
The length≤ 800mm, the width≤ 650mm, and the height ≤100mm.
Get a Quote
available from 8:30 – 17:30
Address:
Building 8, Yintian South Park, Yida Chuntian,
Ganjingzi District, Dalian 116000, China
Email: info@baosteelpump.com
Automated page speed optimizations for fast site performance